Please
note, that the images, logos, and respected artworks, are property of
the original copyright owners. TK560 has no affiliation with any of
the intellectual property owners. This is a fan site dealing with movie
and television replica props, original GIjOE action figures, World War
II memorabilia, and marksmanship/ firearms interests. Most of the images
used on this site are photographed by the site owners. Official logos
are used to identify specific products/ manufacturers.
Need
something?
On this page, you will find mostly surplus from
the fan film or junk I have lying around the shop. Very limited supply.
Use the secure shopping cart to order, [International order, please email
me regarding additional postage.]
RFT
Helmets [Limited Supply] Vacuum formed versions of the RFT helmet,
straight from the fan film!
Here
is another fan film prop, the Rebel Fleet Trooper helmet.
Sometimes called 'Rebel Blockade Runner'. This is based on a mold
taken from an actual WWII US Navy Mark II 'Talker' helmet, and 3
custom made vac-form molds. The communication box, the rear swoop,
and the chin cup. If you want to know more, email
me. We made these for the fan film. Now, for a limited time, you
can get one. These were to be used in the fan film, but due to budget
over-runs, we can only have a limited the number of Fleet Troopers.
Here is your chance to get one of the extra helmets from the production.
These
helmet are available in kit form, or as a ready to wear helmet.
International order, shipping is extra. The shopping cart will calculate
the additional international freight charges when you check out.
Just
what you need to finish the Fleet Trooper costume, these were made
to be used for the fan film, originally and when these extra helmets
are gone, they are gone. I do have a few of the individual parts
available. Just email
me.
Please
allow two weeks for order processing and delivery.
Finished
helmet, ready to wear with liner.
Very limited supply.
$145
plus $20 US shipping. Includes hard hat liner.
Helmet
chincup
with strap
Chincup
includes elastic strap.
$12
plus shipping.
RFT
Helmet Comm-box Kit
Comm-box
includes mounting hardware .
$12
plus shipping.
Helmet Shell
Helmet
shell, white .093 HIPS
$20
plus shipping.
RFT
Helmet Swoop
Helmet
swoop, white .080 HIPS
$15
plus shipping.
Rebel Technician
Helmets [Limited Supply] Vacuum formed versions of the Rebel Tech
helmet, straight from the fan film!
Here
is another fan film prop, the Rebel Tech helmet.
This is based on a mold taken from an actual WWII US Navy Mark II
'Talker' helmet, and 2 custom made vac-form molds. The communication
box, and the chin cup. If you want to know more, email
me. Based on the same molds as the RFT helmet. Now, for a limited
time, you can get one. By popular demand we made a few of these
Rebel Tech helmets kits from left over RFT kits.
These
helmet are available in kit form, only for now. We may have a few
finished Reb Tech helmets available soon.
International order, shipping is extra. The shopping cart will calculate
the additional international freight charges when you check out.
Please
allow two weeks for order processing and delivery.
Finished helmet [not available]
Four
Piece Rebel Tech Kit
Rebel
Technician Helmet Kit
Rebel
Technician Helmet Kit, white HIPS
$45
plus shipping.
Belt Boxes [Limited
Supply] Vacuum formed versions of the belt details,
straight from the fan film!
Here
is another fan film prop, the Rebel or Imperial belt box.
This is based on 2 custom made vac-form molds. Easy to assemble,
and install on your own belt, these boxes can either be painted
or covered with aluminum tape [provided with the kit].
International order, shipping is extra. The shopping cart will calculate
the additional international freight charges when you check out.
Please
allow two weeks for order processing and delivery.
This
is what the finished Belt Boxes look like!
This is what the kit looks like.
Belt
Box Kit [pair]
Very
Limited Supply
$18
plus shipping.
Commando Donut
kit [Limited Supply] Vacuum formed versions of
the hard shell portion of the Rebel Commando helmet.
Here
is the latest prop, the Rebel Commando Donut Kit,
as seen on the forest moon of Endor. This is for the hard shell
portion only. You provide a vintage AN-H-15 flight cap, or replica,
as no soft parts are included in this kit. If you want to know more,
email
me. A very small number of these were made, so don't wait to order
yours. Insignias are available as a download here
[right click and save traget to your computer] or if you want vinyl
decals Email
me. Just what you need to finish your Rebel Commando costume. Custom
molds were made, and the kit includes the top and bottom shells,
support strips, and assembly guide. These kits are made from black
high-impact polystyrene.
International order, shipping is extra. The shopping cart will calculate
the additional international freight charges when you check out.
Click
here for a PDF of the assembly
guide.Click here for a
detailed build tutorial of the donut.
Please
allow two weeks for order processing and delivery.
Example
of the finished donut kit ready for paint. [ANH-15 flight
cap is not included in the kit]
2-piece kit with support strips.
Commando
Donut kit [Limited Supply]
Vacuum
formed kit includes assembly insturctions.
Kit
$44 plus $8 US shipping.
Vinyl
Decal for Commando Donut
Vinyl
Commando Donut Insignia [Limited Supply]
Vinyl
Insignia $5 plus shipping.
Commando Blaster
kit [Limited Supply] Resin and PVC parts to make
the A281 Blaster
We
needed a sniper for our fan film, so we decided on the Rebel
Commando costume. Well, this character needed a Rebel weapon,
so we decided to make the A281 Blaster. The result is a very
limited run of the resin and PVC parts needed to dress up an
airsoft AR15. These kits were to be used with the Well's MR722.
Click here for the assembly guide.
International order, shipping is extra. The shopping cart will calculate
the additional international freight charges when you check out.
Please
allow two weeks for order processing and delivery.
Examples of the Commando Blaster Kits being installed on
the Airsoft Blaster.
Rebel
Commando Blaster Kit.
Rebel
Commando Blaster Kit [SOLD
OUT]
SOLD
OUT
Rebel
Commando Blaster Kit $65 plus shipping.
Well's
MR722 M16 airsoft gun
Well's
MR722 M16 Airsoft Gun [SOLD
OUT]
SOLD
OUT
Well's
MR722 M16 airsoft
gun $28 plus shipping.
Rebel
Commando Bandoleer Kit.
Rebel
Commando Bandoleer Kit
Only
20 sets made.
Rebel
Commando Bandoleer Kit $28 plus shipping.
Please
allow two weeks for order processing and delivery.
Replica Sterling L2A3 [E-11] Parts:
The original
plan for the fan film was to have 20 troopers in some large scale
battles, much like that of the old WWII movies. I started making
the blasters for the 20 troopers, then a production decision was
made to reduce the number of trooper by half. So, I am left with
a bunch of these resin parts, and if you need any let me know [email
me]. These were made to speed up the blaster making
for the fan film, and as a film prop, they do have minor air bubbles,
and flashing that need to be cleaned up. An easy job for the scratch-built
blaster project. These were cast from a real L2A3 Sterling, M38
scope, and counter box. [non-logo version]. Some parts are cast
in a gray resin as a test. These work great, and really help if
you plan to weather your parts.
Sterling
L2A3 Parts Kit
[Limited Supply]
6 piece resin versions of the hard to make blaster
parts
6-
Piece Resin kit
$48
plus shipping
Below
are some pics of these parts being used to build a E-11 blaster
for use in the fan film.
Kit
pieces include the counter box, scope, grip, stock,
end cap, and barrel tip.Mounted
on a piece of PVC pipe, with other parts scratch built.
Sterling
L2A3 Magazine assembly [BACK
IN STOCK]
Here is an upgrade part to speed up the production
of the E-11.
Scratch building was taking too long. We needed to make the
magazine block and magazine easier to build, so I made a cast
from my a real Sterling L2A3. Even has the serial number stamping.
This is a solid resin cast. I did no make as many of these
parts so these are not included as part of the above kits.
Some of the tube area will need to be cleaned up in order
to fit your PVC pipe. Some will have casting flaws in the
magazine release button. See picture.
E-11 grip and Trigger AssemblyCurrently
SOLD OUT.
A waiting list has been started.
I should
have more ready by the end of the April.
Sterling
L2A3 Grip & Trigger Assembly
[SOLD OUT]
Here is an upgrade part to speed up the production
of the E-11.
Scratch building is fun, but time consuming. I needed to speed
up the construction of the blasters, and one area that was
taking longer than it should was the grip and trigger area.
I made a cast from my a real Sterling L2A3. Includes the grip,
trigger and guard, and the ramp with selector switch. No moving
parts. This is a solid resin cast. I did no make as many of
these parts so these are not included as part of the above
kits.
Please
allow two weeks for order processing and delivery.
Trooper Spare
Parts:
Thermal Detonator Control Pad
Thermal
Detonator Control Pad
We have a few extras left over. These are straight
from the fan film.While
making the trooper armor for the film project, we ran a few
extras of these parts. We had intended for these to be used
as a sort of improvised S-trooper hand-grenade in the film.
With way more than the production can use, we now have a few
extras. Made of .080 white High Impact Polystyrene, [HIPs].
Get them while you can for $10 for the control panel, plus
$5 to ship. Great for the Sandtrooper pack project, too!
*Note:
You will need to attach this with velcro, not included.
$12
plus shipping.
Trooper Hip [drop] Boxes
Trooper
Hip Boxes
We have a few extras left over. These are straight
from the fan film.
Here is a pair of spare trooper parts like the ones we made
for the fan film suits. These were not used during the production.
We seemed to have more of these than we can use. Made of .080
white High Impact Polystyrene, [HIPs]. Sold as a pair, $10
plus shipping.
*Note:
These include the elastic for mounting.
$12
plus shipping.
Trooper Hand Armor [pair]
Trooper
Hand Armor
We have a few extras left over. These are straight
from the fan film.
We seem to constantly be misplacing the hand armor. [or they
are walking off the sets, I don't know for sure which] At
any rate, we needed more so I did a small run. Now, I have
a few to spare. $15 for the pair, plus $5 shipping. When these
are gone, there will be no more! Made of .080 white High Impact
Polystyrene, [HIPs].
*Note:
These include the elastic for mounting.
$18
plus shipping.
Trooper Knee Armor
Standard
Knee Armor
We have a few extras left over. These are straight
from the fan film.
We seem to constantly be breaking the knee armor. After working
up a second version of the standard knee armor, now, I have
a few to spare. $10 each, plus $5 shipping. When these are
gone, there will be no more! Made of .080 white High Impact
Polystyrene, [HIPs].
*Note:
Only 10 available
$12
plus shipping.
Trooper Knee Power Pack
Knee Power Pack
We have a few extras left over. These are straight
from the fan film.
Here is the knee power pack, that accent part of the right
knee. Now, I have a few to spare. $10 each, plus $5 shipping.
When these are gone, there will be no more! Made of .080 white
High Impact Polystyrene, [HIPs].
*Note:
Only 10 available
$12
plus shipping.
I have a few other trooper
parts. email
me for details.
Please
allow two weeks for order processing and delivery.
Other Stuff
X-Wing
Pilot chest box
Note, finished boxes are not available.
Wanting
to show a shot-down X-wing pilot for the fan film, I needed
to make all the parts for the costume. Not 100% screen accurate,
but they finish out great! Here is a picture of the finished
prototype. The details are resin, and the button snap is a
found item. So is the hole punch ring, and the red dots.
Here are
some of the extra parts that we have:
Picture
of the prototype kit.
Another view of the kit.
X-wing
Pilot Chestbox Kit
Vacuum formed .080 white HIPs, these chest boxes come with:
chest
box shell
back plate
back plate mounting strips
large
control dial [resin]
six
- 1" square panels
resin
cast 'rocker switches'
metal
snap fastener
black
out material for the dial section
Basic
assembly guide
Kit
does not include the small hardware, red dots, hose, or strap
material, and it will need to be painted.
For an
upgrade to the resin dial consider one of these from ElvisTrooper.
Click here
for details. He has a replica machined aluminum version that
can be purchased along with other goodies: http://www.elvistrooper.com/props.htm
Note:
less than 20 made.
$34
plus shipping.
Solid Resin Rocker Switch
X-wing
Pilot / TIE Pilot Rocker Switches
Resin cast 'rocker switches'. Cast as a single piece, these
appear to be 3 seperate switches. Can be cut out with razor
saw.
Note:
less than 20 made.
$8
each plus shipping.
Do
you want to help out with the fan film production? Use
the button below to send money:
Vintage
Computer Gear If
I can't sell them here, its off to ebay they go!We
have a small batch of computers and printers. Most of these came
from a school surplus sale, and are still functional computers.
Vintage
Mac Plus computers, with keyboard, mouse, external drive, and
boot disk with Mac Write, Mac Paint, and Dark Castle are available
for $25 plus shiping. These are the famed Star Trek IV: The Voyage
Home, "Hello, Computer?" Macs Scotty used to display
'transparent aluminum'.Vintage
Apple ImageWriter II dot matrix printers with cables, and a new
printer ribbon, $40 plus shipping.
Apple
eMate 300 NewtonOS computers, complete in the box with all paperwork.
includes cables, and extra stylus, $75 plus shipping.
I have made a book
version of the vacuum form machine instruction found scattered
about on this site. Printed professionally, this is a limited
edition, and more thant just a copy of the webpage. Lots of
additional information, pictues, and diagrams to help you
get your vacuum form machine up and running. Click
here . Better than trying to download and print out the
site if you are on a slow connection!
Special Note:
Please
remember, if you are ordering, these parts and kits are from extras,
left over from the fan film. And when they are gone, they are gone.
The goal was to produce props as cost effective as possible. This
is a limited run of usually less than 20 pieces each. Casting flaws,
and all. Its part of the process. The helmets are made by hand,
one at a time as needed. The resin blaster parts are from a small
stockpile that is rapidly selling away. I do not plan to make any
more once these supplies are gone. Check back often for updates.
I'm not in this hobby to try and 'make a buck', just trying to help
out other prop makers and collectors. But with a little effort,
and some creativity, you too can make your own props and costumes.
Returns:
Most
folks that have ordered from me have been happy with their purchases.
But, if you are not, just send the unused parts back, in the same
condition they were sent in, within 90 days from date of purchase,
and I will refund your money minus the shipping and any PalPal fees.
Also, a 25% restocking fee may be applied to purchases over $40.
No returns will be accepted if the parts have been modified, assembled,
or painted. Original condition parts only. Remember, most all of
these parts are extras, or left over surplus from the production
of the props and costumes for the fan film. The goal of the molds
and masters was to produce props as cost effective as possible.
Expect some casting flaws, flashing, air bubbles, etc.