View previous topic :: View next topic |
Author |
Message |
Action Burt
Joined: 22 Feb 2012 Posts: 2
|
Posted: Sun Feb 26, 2012 3:18 pm Post subject: Newcomer with a project. |
|
|
Hi there.
I'm a total newcomer to vacuum forming and I'm looking for some advice for a project I'm working on.
I've been using a little machine bought from China for making personalised soft toy gifts. You basically print a photo of the customer's face on special plastic paper then the machine vacuum forms the picture into a little 3D face which goes into a special soft toy.
It's a cool and slightly creepy looking gift.
I've been trying to find out more about the special paper I use. I've been buying it from China and its quite expensive so I was hoping to find out what the paper is actually called and maybe buy it a little closer to home.
The main thing I'm working on at the moment is trying to make a full size version of the little machine and make life size 3D masks.
Just spent a fortune on larger size paper from China.
I did attempt making a machine out of a plastic storage container but I managed to blow a hole through it!
That's when I decided to find a forum of experts
Look forward to getting any advice for my second attempt and I promise to post pictures of my progress good and bad along the way
I also collect and restore vintage GI Joe and Action Man figures (Noticed there was a GI Joe section). |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
IMMark Expert
Joined: 18 Nov 2010 Posts: 189 Location: Columbus, Ohio
|
Posted: Sun Feb 26, 2012 3:26 pm Post subject: |
|
|
Hi Burt
Welcome to the group!
Can't really add anything specific on your project, perhaps others know more about it?
Sounds like a thin HIPS or perhaps PETG?
Just a total guess, maybe if you have any links to what you purchased we could take a look.
Mark |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
Action Burt
Joined: 22 Feb 2012 Posts: 2
|
Posted: Tue Feb 28, 2012 4:37 am Post subject: |
|
|
IMMark wrote: | Hi Burt
Welcome to the group!
Can't really add anything specific on your project, perhaps others know more about it?
Sounds like a thin HIPS or perhaps PETG?
Just a total guess, maybe if you have any links to what you purchased we could take a look.
Mark |
Thanks Mark, here's a link...
http://i02.i.aliimg.com/img/pb/317/277/260/1280557076287_hz-myalibaba-web9_5582.jpg
It would be good to find out exactly what the paper is and I also want to make a larger version to make full size masks/faces
These are the results I got with the standard smaller moulds...
Like I mentioned previously, I've already purchased the special film (A4 size) and I attempted to make a vacuum former...which didn't really work out to well
So I've been having a good look around the forum looking for ideas for my next attempt. |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
Fredo Master
Joined: 21 Mar 2007 Posts: 251 Location: Kingdom of Nye Area 51
|
Posted: Tue Feb 28, 2012 10:57 am Post subject: |
|
|
That little former looks a lot like a real cheap dental vacuum former. here's some pics of some not so cheap formers..... http://www.bing.com/images/search?q=dental+vacuum+forming+machine&qpvt=dental+vacuum+forming+machine&FORM=IGRE A 10"x10" along those lines would would do a face mask. If it's printed on plastic, just about any [good] small vacuum former would work.
Do you print the pictures on the computer, in a dark room, if it's on a printer, the first thing I would do is find some thin plastic and run it through a printer and see what happens.... If its printed, it's the ink that needs to take the heat.... Tell us about the mold or molds you'll use, how do you decide on the face shape of the mold for different pictures. It'll be interesting to see how this turns out..............Fredo
PS
Start a thread on the vacuum forming forum, we go on long enough here we'll get kicked off this one. _________________ If someone has a gun and is trying to kill you,
it would be reasonable to shoot back with your own gun...The Dalai Lama..Seattle 2001 |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
IMMark Expert
Joined: 18 Nov 2010 Posts: 189 Location: Columbus, Ohio
|
Posted: Tue Feb 28, 2012 3:23 pm Post subject: |
|
|
Very nice!
I really meant a link to the "paper" you use.
Also, Fredo is correct...should move this to the vacuum form forum.
Mark |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
|