|
www.TK560.com Vacuum Forming, Movie Prop, Sci-fi and GIjOE Forum
|
|
|
View previous topic :: View next topic |
Author |
Message |
Lp Zeppelin Newbie
Joined: 01 Aug 2007 Posts: 23 Location: Parker, Co
|
Posted: Fri Aug 03, 2007 10:40 am Post subject: Mold Material Question |
|
|
Hi jim would making the molds out of mdf board like you be really hard. also would moddeling foam lik the stuff at hobby lobby make good molds or will they dteriate extreamly fast
Thanks,
Lp _________________ I wonder What lady clones look like under the mask? I wonder? |
|
Back to top |
|
|
jegner Site Admin
Joined: 30 May 2003 Posts: 2144 Location: Texas, USA
|
Posted: Fri Aug 03, 2007 3:02 pm Post subject: |
|
|
IF you can carve wood, either with hand tools, or power tools, MDF mold making is the way to go. You sculpt the vac-forming pattern directly.
Other options, like clay sculpts, or even foam, are not strong enough to hold up to vacuum forming directly. You would have to go an additional step, making a mold of the scuplt, then pouring the pattern out of Ultracal30.
Trade offs are, the MDF is direct to forming pattern making. No need to make a casting, unless you just want a duplicate. MDF is a wood product, so it requires tools to work with.
Clay or foam is easy to sculpt, but you have to make a mold of it, and cast a copy in a cement meduim.
Jim |
|
Back to top |
|
|
drcrash Guru
Joined: 04 Sep 2006 Posts: 705 Location: Austin, Texas
|
Posted: Fri Aug 03, 2007 3:27 pm Post subject: |
|
|
I find the molding and casting to be pretty quick and easy compared to coming up with a good sculpt in the first place. I can't imagine sculpting with a bandsaw and belt sander.
(I might find it easier to imagine if I had my own band saw and a belt sander, and more experience with them.)
So much time goes into a good sculpt that it seems like a good investment to do whatever you can to make that part go faster, even at the cost of an extra step.
Professional mold makers often do make short run molds of MDF, but I suspect that's usually for relatively simple shapes where you can cobble things together from polygons, round the edges with a router, etc. For subtly-changing compound curves, it seems pretty awkward, and easily-sculpted media seem likely to save time getting it right. _________________ Paul (a.k.a. Dr. Crash)
Tired of buying cheap plastic crap? Now you can make your own! www.VacuumFormerPlans.com |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|