![www.TK560.com Forum Index](templates/aluminoid/images/aluminoid_logo.gif) |
www.TK560.com Vacuum Forming, Movie Prop, Sci-fi and GIjOE Forum
|
|
![](images/spacer.gif)
![Usergroups](templates/aluminoid/images/lang_english/icon_usergroups.gif)
|
View previous topic :: View next topic |
Author |
Message |
TK 109 Guru
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/smith_178.jpg)
Joined: 11 May 2007 Posts: 712 Location: Galena, Ohio
|
Posted: Thu Oct 11, 2007 6:00 pm Post subject: |
|
|
good idea jim!
i would have to get some mighty strong bungee cords though...
i may have to look and see if i have some that fit the bill...
thanks! but, to be honest, it doesn't really make a difference for me... i mean, i can pull the piece, and then turn the vacuum off and put the lid back on and it takes the oven no time at all to recover. by the time i put the lid on, remove to plastic from the frame, and put another piece in, it's PLENTY HOT (around 550-600 degrees F after 25 mins) to pull another piece. plus, most of the time my sister is hanging around to help, and if she isn't, eh, the pull pulls fine and i continue with the cycle!
and cod, i LOVE smell of plastic (HIPS, that is) in the morning, reminds my sister of christmas, and me of success, baby!
what i really need to do is (if i ever use this thing to pull more armor again...) is figure out a new frame! i made mine a bit to small, i get a seal, but it would be MUCH easier if i made my frame 24" sq, instead of 24.5" square. that little bit would make it easier on me to make a seal, i think...
thanks for the input!
stay tuned for my FULL LENGTH vacuum-forming video, coming possibly this weekend!
(maybe this weekend........?) _________________ -Alex
-------------------------------------------------------
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/evil-agent-smith-1.jpg) |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
TK 109 Guru
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/smith_178.jpg)
Joined: 11 May 2007 Posts: 712 Location: Galena, Ohio
|
Posted: Thu Nov 01, 2007 6:03 pm Post subject: |
|
|
ok, here is my full-length vacuum-forming video! (in 4 parts)
PART 1:
PART 2:
PART 3:
PART 4:
sorry, the quality is a bit rough, but hopefully you catch my drift.
enjoy! ![Very Happy](images/smiles/icon_biggrin.gif) _________________ -Alex
-------------------------------------------------------
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/evil-agent-smith-1.jpg) |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
CJanssen Expert
![](http://i168.photobucket.com/albums/u165/CLJanssen/swep1_watto.jpg)
Joined: 17 Feb 2007 Posts: 215 Location: Beaverton OR
|
Posted: Thu Nov 01, 2007 6:30 pm Post subject: |
|
|
NICE work on the videos Alex ! I was a little bummed because my favorite part of vac-forming wasnt in the video....watching the plastic forming over the molds is way cool....
I use those same snips to rough cut my armor as well.
great job
CJ _________________ "What, you think your some kind of Jedi?" |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
TK 109 Guru
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/smith_178.jpg)
Joined: 11 May 2007 Posts: 712 Location: Galena, Ohio
|
Posted: Fri Nov 02, 2007 7:33 am Post subject: |
|
|
yeah, i was a little bummed out too, because we ran out of film when the plastic was at the PERFECT temp for forming. my sister ran inside to get some more film, and i had already formed. we then decided that the actual forming was VITAL to the film, so i reloaded the machine. i pulled, but that same area where the shoulder bell formed "too fast...err....whatever....", had actually popped, so no good there....
oh well, but thanks CJ! _________________ -Alex
-------------------------------------------------------
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/evil-agent-smith-1.jpg) |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
drcrash Guru
![](http://i136.photobucket.com/albums/q176/drcrashpix/avatars/CrashToon_layers80x80.gif)
Joined: 04 Sep 2006 Posts: 705 Location: Austin, Texas
|
Posted: Fri Nov 30, 2007 3:21 pm Post subject: itsy bitsy teeny we TJ machine |
|
|
http://youtube.com/watch?v=9NY2N2zq2TY
Kinda cute... a TJ machine for plastic about one foot square.
(I don't think that's actually an especially good idea, or the right size/shape for making masks, but I'm sure it works fine, and I thought it was funny to see an itty bitty version.) _________________ Paul (a.k.a. Dr. Crash)
Tired of buying cheap plastic crap? Now you can make your own! www.VacuumFormerPlans.com |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
TK 109 Guru
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/smith_178.jpg)
Joined: 11 May 2007 Posts: 712 Location: Galena, Ohio
|
Posted: Sat Dec 01, 2007 7:00 pm Post subject: |
|
|
i wonder uf the kids made the molds out of clay, and the teacher vacuum-formed it. that would be a hit in any classroom, i think!
that WAS cute... ![Smile](images/smiles/icon_smile.gif) _________________ -Alex
-------------------------------------------------------
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/evil-agent-smith-1.jpg) |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
TK 109 Guru
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/smith_178.jpg)
Joined: 11 May 2007 Posts: 712 Location: Galena, Ohio
|
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
crashmann Guru
![](http://www.tk386.com/remotepix/TC-386-small-2a-stamped-lean.gif)
Joined: 27 Sep 2005 Posts: 501
|
Posted: Thu Jan 31, 2008 4:13 pm Post subject: |
|
|
Here's a video on YouTube from nullVDevice showing off their nice vacuum forming machine. It uses a fixed plastic clamping frame, and you roll the oven heating cage over the plastic to heat it up. Once warm, roll the oven back, and use pneumatic lifts to raise the platen into the softened plastic. Apply vacuum, and voila! Parts!
Be sure to watch all the way to the end for alternate uses for your vac table
http://youtube.com/watch?v=Toi3eamF5ag
Charlie |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
TK 109 Guru
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/smith_178.jpg)
Joined: 11 May 2007 Posts: 712 Location: Galena, Ohio
|
Posted: Thu Jan 31, 2008 7:46 pm Post subject: |
|
|
that's cool! i wonder if you could cook a steak on it.... or vacuform a steak. that's a nice set-up. very professional-looking.
that sandwich just imploded!
![Laughing](images/smiles/icon_lol.gif) _________________ -Alex
-------------------------------------------------------
![](http://i205.photobucket.com/albums/bb208/TKstormtrooper/evil-agent-smith-1.jpg) |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
ahillworks Master
![](http://ahillaudio.com/gallery/albums/userpics/10001/normal_FBAGraffiti2.jpg)
Joined: 18 Nov 2007 Posts: 308 Location: Orlando FL
|
Posted: Fri Feb 01, 2008 2:04 am Post subject: |
|
|
WOW can't wait to see what mine does this sunday hehe. I love the cheese toast idea lol. I beleave mine gets hot enouf to keep pizza warm lol Nice set up though. |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
crashmann Guru
![](http://www.tk386.com/remotepix/TC-386-small-2a-stamped-lean.gif)
Joined: 27 Sep 2005 Posts: 501
|
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
jegner Site Admin
![](http://www.tk560.com/TK560avitar.gif)
Joined: 30 May 2003 Posts: 2144 Location: Texas, USA
|
Posted: Tue Feb 05, 2008 3:33 pm Post subject: Re: itsy bitsy teeny we TJ machine |
|
|
drcrash wrote: | http://youtube.com/watch?v=9NY2N2zq2TY
Kinda cute... a TJ machine for plastic about one foot square.
(I don't think that's actually an especially good idea, or the right size/shape for making masks, but I'm sure it works fine, and I thought it was funny to see an itty bitty version.) |
Fun stuff! |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
fz1 Newbie
Joined: 04 May 2008 Posts: 8 Location: Cleveland, Ohio
|
Posted: Fri May 09, 2008 7:44 pm Post subject: |
|
|
Some asked me for pics of my frame and machine. No pics but drawings I made before building. The frame is 20mm x 20mm 3 slot extruded alum. All of the center parts can be moved and relocated as needed for different size platens. The outer frame remains the same. Special T-nuts used lets me tighten up the parts where needed.
The machine below is almost like my machine but I do not have the heat box made yet. the platen in the drawing is 46 inches long.
In a few weeks I should get some real pics after I get some more work done. |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
Culvan Novice
![](http://img.photobucket.com/albums/v228/Jirikchi/thumbs/trooperthumb.jpg)
Joined: 20 May 2008 Posts: 85 Location: Kansas City, MO
|
Posted: Wed May 21, 2008 8:56 pm Post subject: |
|
|
Here's a couple of pic of my system. It folds up for storage. I got the idea for that from jemartin144. I've left it a little more open to help vent excess heat on the wood.
Andy |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
inventer Novice
Joined: 22 Apr 2008 Posts: 55
|
Posted: Wed May 28, 2008 1:22 am Post subject: need help guys |
|
|
Hi gang, finally got some plastic samples. I have some major guestions if anyone can help. Heres some photos from todays pulls, I'm getting big wrinkles on the flat part of my pull and got them on all pulls. I did'nt have this heat shield for the other pulls and got wrinkles, so, I put a shield over the middle of the coils because it gets the hottest there, as you can see, I still got the wrinkles. Heres a picture of my mold, it's 19" long, 13" wide and tapered from 1 1/2" to a half inch. As you can see from the other pictures I'm getting pinched out corners on the deep end of the pull. My question is what am I doing wrong ? I watched that guy doing his pull on youtube with his pull out oven, lifted his plastic twice than did his pull, I tryed that and still got these wrinkles I'm uesing .010 PETG. Im really amazed at how much sag there is when heating, so now I have to figure out how to set the plastic on the mold to pull without getting these wrinkles. I have read you guys use .020 and thicker so I hope someone can throw out some ideas. Hope this link works, I'm not much for computers. Tony http://www.villagephotos.com/members/album.asp?folder_id=2000127 For those of you who havn't seen my machine, heres pictures, http://smg.photobucket.com/albums/v81/vanner40/vac%20u%20form/ I'm getting more plastic samples this week and would like some advise, any input ? |
|
Back to top |
|
![](templates/aluminoid/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|