View previous topic :: View next topic |
Author |
Message |
vacunoob Novice
Joined: 03 Apr 2009 Posts: 49 Location: Hickory, NC
|
Posted: Sun Apr 05, 2009 10:23 pm Post subject: Sweet |
|
|
The red machine that was destine to be yours is sweet! $300 seems like a great deal.
Though, the heating element looks very unique (in my vast, one week abyss of vacuum former knowledge. lol). Have you pulled from it yet? |
|
Back to top |
|
|
vacunoob Novice
Joined: 03 Apr 2009 Posts: 49 Location: Hickory, NC
|
Posted: Sat May 02, 2009 11:17 am Post subject: |
|
|
cod wrote: | Wow, good work. very impressive. Inspiring.
I think you might've gotten your pulley idea from me ?
http://cjod.net/cpg/thumbnails.php?album=2
I'd like to be a worry wart and say a few things about that pulley setup of yours- it looks like its mounted on the inside of the oven- I would seriously consider what might happen if that cable flies loose and touches some live current. If there's a way you can ground it you might be safer- the wood handle certainly helps .....but I am concerned.
Also , are you saying that your wires up top had fused together ? That should not be happening - it means the wire is over-capacity..... are you using standard house wiring up there ? I would use oven wire with a glass shell, of the proper amperage .......It's great to cut corners and all, but this is serious business. You don't wanna burn down your bosses' shop- or worse!
Colonel 2 Cents |
@COD- Have you ever done a video of your "vacuforming process"? If so drop me a link. |
|
Back to top |
|
|
CrazyFool Expert
Joined: 07 May 2008 Posts: 203
|
Posted: Tue May 05, 2009 1:51 am Post subject: |
|
|
I think you were talking to COD but... as for me? Did I make a video of any pulls? Actually, I did not film any pulls when I still had the machine running (in storage now) because I was too embarrassed, but my brother did film a pull using it. I will see if he has the video. I will say that my machine was slapped together in a hurry and my pulley system could have 'ahem' used a bit of tweaking! LOL. Hey, but it worked. |
|
Back to top |
|
|
vacunoob Novice
Joined: 03 Apr 2009 Posts: 49 Location: Hickory, NC
|
|
Back to top |
|
|
CrazyFool Expert
Joined: 07 May 2008 Posts: 203
|
Posted: Tue May 05, 2009 4:20 pm Post subject: |
|
|
vacunoob,
That is a clean looking setup you've got there. I like it. Good job! |
|
Back to top |
|
|
CrazyFool Expert
Joined: 07 May 2008 Posts: 203
|
Posted: Fri May 15, 2009 6:28 am Post subject: |
|
|
I'm still waiting to be paid the additional $5,000+ that I'm owed for this auto lube store sign project, but in the meantime I was asked to make a new website for the stores. (BTW the owners are good people and I know they will pay me eventually. Things are just a little tight right now so I told them not to worry about me for the moment.) My little site is not too earth shattering but I'm pleased considering the fact that I really don't make websites. I pretty much did everything aside from the original oil filter character drawing and the TV commercial. I animated the character, did the pistons animation, took the photos, drew the buttons, edited the Flash video, etc. Funny. Sometimes it seems simple but I actually used about five different software programs, chiefly Macromedia Fireworks and Flash (now owned by Adobe). I'm beginning to think I may be much more of a geek than I imagined! Anyhow, here is a screen shot for your amusement...
www.gottalube.com
CF |
|
Back to top |
|
|
jegner Site Admin
Joined: 30 May 2003 Posts: 2144 Location: Texas, USA
|
Posted: Fri May 15, 2009 10:42 am Post subject: |
|
|
Well done! |
|
Back to top |
|
|
ahillworks Master
Joined: 18 Nov 2007 Posts: 308 Location: Orlando FL
|
Posted: Fri May 15, 2009 4:29 pm Post subject: |
|
|
Hey man from making that from start it looks pretty good and I make sites all the time. |
|
Back to top |
|
|
CrazyFool Expert
Joined: 07 May 2008 Posts: 203
|
Posted: Tue Mar 01, 2011 5:09 am Post subject: |
|
|
Just a short update in case any of you guys ever wondered what happened to me. The auto lube stores I made the signs for (using my home built vacuforming machine) went out of business. Not sure why. Stuff happens I guess. The problem for me is that they still owe me $5,000, and they have my machine. The machine I'm not too worried about because I just threw it together as fast as I could for that job. But the 5 grand kinda stings. It's complicated because I still work for them at one of their other businesses and that job is going okay I suppose. It's not my full time job but I don't really want to make waves about the 5 grand because I feel they will pay me eventually. Everyone is aware of it. We just don't talk about it anymore. So I was kind of bummed about the stores going out of business and my signs being taken down. Plus I am still out thousands of dollars. All added together I just haven't been in the vacuforming mood if you know what I mean. But hey, I am still amazed at all the products I see every time I visit the hardware store that are 100% vacuformed. There are a lot of opportunities out there for people who are serious about vacuforming. Anyhow, take care guys. Maybe I'll do something crazy again before long! |
|
Back to top |
|
|
panhandle_shovelheadrider Novice
Joined: 06 Jul 2010 Posts: 59
|
Posted: Wed Mar 02, 2011 10:16 am Post subject: getting the job is good |
|
|
getting paid is the trick.I am not being smart .A lot of folks can work all the time and not get paid.It is a skill equal to the skill in producing the work |
|
Back to top |
|
|
CrazyFool Expert
Joined: 07 May 2008 Posts: 203
|
Posted: Fri Mar 04, 2011 6:14 am Post subject: Re: getting the job is good |
|
|
panhandle_shovelheadrider wrote: | getting paid is the trick.I am not being smart .A lot of folks can work all the time and not get paid.It is a skill equal to the skill in producing the work |
I agree with that 100%. Live and learn. Or not! |
|
Back to top |
|
|
jannypan Guest
|
Posted: Thu Mar 10, 2011 11:30 pm Post subject: |
|
|
I like the idea of splitting the ovens across two separate circuits. It's simple, and it works very nicely! |
|
Back to top |
|
|
charlie476
Joined: 10 Mar 2011 Posts: 4
|
Posted: Thu Mar 10, 2011 11:45 pm Post subject: Re: getting the job is good |
|
|
CrazyFool wrote: | panhandle_shovelheadrider wrote: | getting paid is the trick.I am not being smart .A lot of folks can work all the time and not get paid.It is a skill equal to the skill in producing the work |
I agree with that 100%. Live and learn. Or not! |
Have you thought about molding products to sell on ebay? Seems like with the right things molded you could produce a full time income. |
|
Back to top |
|
|
CrazyFool Expert
Joined: 07 May 2008 Posts: 203
|
Posted: Fri Jul 08, 2011 1:40 am Post subject: Re: getting the job is good |
|
|
charlie476 wrote: | Have you thought about molding products to sell on ebay? Seems like with the right things molded you could produce a full time income. |
You are right. It is a great idea to sell stuff on eBay. A great idea. My problem right now is that I work too much. (I have had 2 jobs for 10 years. Doing the auto lube signs was like a 3rd job.) I don't have any energy for things I would like to do. It's really stupid, shooting myself in the foot like that.
It's fun to walk through the hardware store (or any store) and try to pick out all the stuff you can find that is 100% vacuum form molded. At first it can be a little frustrating, as you find a lot of things are made by plastic injection, but eventually your list will grow and you'll start to say, "Hey, I can do that one!" Before long you will think of ways to make existing products better or think of things other people have not thought of, or are not selling.
You are totally right. There is a lot of opportunity out there for selling purely plastic stuff online. |
|
Back to top |
|
|
|