View previous topic :: View next topic |
Author |
Message |
LaughingCheese Expert
Joined: 24 Mar 2008 Posts: 138
|
Posted: Sun May 03, 2009 7:47 pm Post subject: Want to build a desk |
|
|
Ok, so my current desk is annoying me slightly but the last few times I've looked I haven't seen anything I like.
I don't think I want anything too complicated, like those desks that have second levels for office supplies and cabinets and such, though that may be necessary at some point....
What I want is something that has space for up to two, 24" monitors, although IF I do get a dual monitor setup I'll probably go with 21" or 22", I just don't think I need a total of 48'.
Also I'm thinking I would like a section that would hang off and support three 'tables' (not sure what their called) for a printer and such.
The other two machines would be a small 3D printer Cartesian robot and a small CNC router (4x4 or something).
However, I have zero experience with woodworking (as I've stated before I think).
I don't want to get a whole degree and career in woodworking, just enough.
Or does building a desk require I know everything?
Going to model it in 3D sometime so you can see what I'm talking about.
Sometime....
Thanks
LC |
|
Back to top |
|
|
jegner Site Admin
Joined: 30 May 2003 Posts: 2144 Location: Texas, USA
|
Posted: Mon May 04, 2009 12:17 pm Post subject: |
|
|
hmmm. Sounds interesting. My studio has some custom made oak tables, but it's really more of a large work surface than a computer desk table. Nothing fancy. |
|
Back to top |
|
|
LaughingCheese Expert
Joined: 24 Mar 2008 Posts: 138
|
Posted: Thu Jun 04, 2009 12:49 pm Post subject: |
|
|
jegner wrote: | hmmm. Sounds interesting. My studio has some custom made oak tables, but it's really more of a large work surface than a computer desk table. Nothing fancy. |
That's exactly what I want, nothing fancy!
Just something nice and flat, so that my monitor isn't raised and I'm not tempted to slouch. |
|
Back to top |
|
|
kruzer Newbie
Joined: 30 Apr 2010 Posts: 14 Location: newport, oregon
|
Posted: Wed May 05, 2010 11:08 pm Post subject: Cool desk the easy way |
|
|
I may be late with this reply but I built many desks the easy way.
If you want a straight desk and a very heavy duty one, do this:
-Get a door blank, (choose width) preferably SOLID core. Pick the size you want and take it home. Finish the top surface and get two file cabinets for base.
The door blank is VERY HEAVY and may need help moving it.
Don't use cheap empty door core. It will sag and even crack under the weight of your equipment.
If you want a nice corner desk do this:
-Get two door blanks, make sure it's the same wood grain or looks close to one another. Cut 45 degree on both door blanks and join it together.
Here's the tricky part. You must have a center (45 angle cut) support or the whole thing will collapse. The end supports have to be sturdy as well, but you can use steel file cabinets if you wish.
I have two 22" monitors on the long desk part and another 22" monitor on the short return part. You can make it equal lenght, but it looks kinda HUGE that way and best to make the side part much shorter.
The door core I use is 36" or 32" wide. You can imagine the space I have on this desk
How to finish the top:
Use Minmax glossy clear resin and give it a few coats. The wood under it will look fantastic and you have a hard surface. As for the sides of the desk I used mouldings and nail it on.
Hope that helps if you want build a cool desk over the weekend.
The only thing required is a circular saw. |
|
Back to top |
|
|
Stomper Master
Joined: 01 Oct 2005 Posts: 473 Location: Woodburn, Oregon USA
|
Posted: Sun Jun 27, 2010 7:04 pm Post subject: |
|
|
I think you should build one of these!! You can put your computer guts in the cockpit.
_________________ Tony Krewson
FEAR... is not my god!! |
|
Back to top |
|
|
PARATECH1 Expert
Joined: 19 Mar 2008 Posts: 112 Location: ALABAMA
|
Posted: Sun Oct 30, 2011 12:53 pm Post subject: |
|
|
That Tie-Fighter table is friggen' awesome looking. That was a really cool idea. |
|
Back to top |
|
|
|