View previous topic :: View next topic |
Author |
Message |
sskunky Newbie
Joined: 01 Jul 2010 Posts: 6 Location: UK
|
Posted: Fri Jul 02, 2010 1:37 am Post subject: Making bucks from FG moulds |
|
|
Hi guys,
I have recently bought a set of Fiberglass TK armour moulds and need to reverse them into bucks for a former. These are first generation moulds taken from a screen used set of armour so all rights reserved;) I understand about damning up the recesses but have been told that the run off the edges should be a shallow sloping as poss to aid the release once the pieces are formed. The only thing wrong with this is that there should be a return on the armour to give he appearence of thickness. Thus the angle of the edges of the buck need to be flat.
Does this work ok for forming or will I have problems releasing the plastic from the mould?
I'm using Acrystal Prima plaster as it's very strong and has an extremely low expansion rate. What's the best release agent to use if pouring plaster into Fiberglass? Silicone spray? liquid Soap? Vaselene?
I have a vacuum chamber to degas the plaster so bubble free casts:)
any advice or tips greatly appreciated.
Thanks. _________________ It'l be ready when it's ready and not a moment sooner! |
|
Back to top |
|
|
jegner Site Admin
Joined: 30 May 2003 Posts: 2144 Location: Texas, USA
|
Posted: Fri Jul 02, 2010 10:39 am Post subject: |
|
|
Hmm. Pics might help us advise you better. |
|
Back to top |
|
|
sskunky Newbie
Joined: 01 Jul 2010 Posts: 6 Location: UK
|
Posted: Fri Jul 02, 2010 11:45 am Post subject: |
|
|
Yeah,
You are right . I'll take some and post. _________________ It'l be ready when it's ready and not a moment sooner! |
|
Back to top |
|
|
stormtrooperguy Expert
Joined: 24 Sep 2009 Posts: 126
|
Posted: Mon Jul 05, 2010 9:10 pm Post subject: |
|
|
on my clone armor i have very steep sides, some minor undercuts, and very deep pulls.
it all works out, but each piece has to be cut off the molds. this of course damages the molds, so i am pretty much constantly repairing things. i'd say every 10 kits or so i've had to spend a couple of days repairing damage.
the fiberglass molds you have... are they negatives or positives? if it's a negative, i'd suggest pouring positives with ultracal and just going at it on those... if you damage the ultracal too badly you can always pour another.
if you have positive fiberglass i'd so the same, but would make a waste mold as an extra step. i've been playing around with using alginate for 1 time molds of positives like that. it's cheap and dries fast. it's fragile, but if you are only looking for 1 casting that's not such a bad thing. |
|
Back to top |
|
|
sskunky Newbie
Joined: 01 Jul 2010 Posts: 6 Location: UK
|
Posted: Tue Jul 06, 2010 12:55 am Post subject: |
|
|
Thanks Stormtrooperguy.
That's pretty much what I thought. I've found a very strong plaster called Acrystal Prima. It has a very low exotherm when drying and only has 0.1% expansion rate. It is used for delicate ceiling roses where thin designs need pulling from molds without breaking. It's supposed to be the strongest of the plasters available. The only drawback is it's price, not cheap. I'll let you know how it performs.
All my damned up armor is ready to pour into. I have gone with steep sides so as to get a return to add thickness to the armor without having to use a hobby iron.
I'll post pics after my first casting. _________________ It'l be ready when it's ready and not a moment sooner! |
|
Back to top |
|
|
sskunky Newbie
Joined: 01 Jul 2010 Posts: 6 Location: UK
|
Posted: Tue Jul 06, 2010 7:41 am Post subject: |
|
|
here is where I'm at so far.....
_________________ It'l be ready when it's ready and not a moment sooner! |
|
Back to top |
|
|
|