View previous topic :: View next topic |
Author |
Message |
LaughingCheese Expert
Joined: 24 Mar 2008 Posts: 138
|
Posted: Mon Jun 02, 2008 1:42 pm Post subject: Decisions, Descisions... |
|
|
Ok, I was really hoping that, since I'm on a budget, that I would be able to build a CNC and vacuum forming machine for roughly $400 each.
I just learned though that it might not be possible to make a CNC machine for under $400 or $500.
So I've been thinking that my only alternative may be to build a vacuum form machine (because that DOES seem doable for less than $500) and then try to hand sculpt the molds from polyurethane foam.
What do you guys think? |
|
Back to top |
|
|
jegner Site Admin
Joined: 30 May 2003 Posts: 2144 Location: Texas, USA
|
Posted: Mon Jun 02, 2008 4:51 pm Post subject: |
|
|
You can definitely build a Thurston James type vacuum form machine for much less than $500, if you opt for a shop-vac vacuum source. A hi-vac/tank option will run you over that budget if your not careful.
As for the CNC, the mills I've seen are way more expensive than $500 and thats BEFORE the CNC upgrade, software, and PC to run the mill. Then your looking at a lot of time making the G-code.
Jim |
|
Back to top |
|
|
LaughingCheese Expert
Joined: 24 Mar 2008 Posts: 138
|
Posted: Mon Jun 02, 2008 6:16 pm Post subject: |
|
|
jegner wrote: | You can definitely build a Thurston James type vacuum form machine for much less than $500, if you opt for a shop-vac vacuum source. A hi-vac/tank option will run you over that budget if your not careful.
As for the CNC, the mills I've seen are way more expensive than $500 and thats BEFORE the CNC upgrade, software, and PC to run the mill. Then your looking at a lot of time making the G-code.
Jim |
Well, I was thinking EMC2 for controller software, and my old Compaq PC, except I need to get a monitor for it...we got rid of the monitor. That was dumb...lol.
And maybe I wasn't clear, but I when I was talking about CNC, I meant building one too, just like the vacuum form machine.
Obviously I can't afford a commercial one. :p
I have at least 3 sources for plans...
I think the most expensive part of the CNC would be the stepper motors, and if I have to buy a router. |
|
Back to top |
|
|
crashmann Guru
Joined: 27 Sep 2005 Posts: 501
|
Posted: Mon Jun 02, 2008 9:57 pm Post subject: |
|
|
Join Freecycle for your local area and post that you are looking for a computer monitor. There's lots of old glass tubes out there that are being replaced by LCD's.
Perhaps you could build your vacuum forming machine, make a really cool unique item, then use the proceeds to pay for the CNC machine
Charlie |
|
Back to top |
|
|
LaughingCheese Expert
Joined: 24 Mar 2008 Posts: 138
|
Posted: Mon Jun 02, 2008 11:14 pm Post subject: |
|
|
crashmann wrote: | Join Freecycle for your local area and post that you are looking for a computer monitor. There's lots of old glass tubes out there that are being replaced by LCD's.
Perhaps you could build your vacuum forming machine, make a really cool unique item, then use the proceeds to pay for the CNC machine
Charlie |
That would be cool...
Or I could just get a job..sigh..
(Long story...) |
|
Back to top |
|
|
Jeprachaun Newbie
Joined: 12 Apr 2008 Posts: 8 Location: Southern California
|
Posted: Thu Jun 05, 2008 10:02 pm Post subject: |
|
|
I agree LC the stepper motors are probably the most expensive part of the whole project as you can build your own controller and download free controller software. If you are careful you can do it for a reasonable price. To make it cheaper you could try to find stepper motors from surplus sites/ebay, get free wood that people are throwing out, etc. Keep us updated on your decision/progress.
O'Malley |
|
Back to top |
|
|
|